Railcore 2 300 ZLT Acrylic Parts

[Railcore Upgrade Parts]

By popular request, the ZLT doors are here!

You have the choice between smokey grey or clear acrylic.

The doors are based on the design of J. Steve White for the 300ZL, and modified to fit the 300 ZLT. They are designed to go flush with the outside of the printer, not inside the cutout. The hardware kit can be downloaded from thingiverse at:

Make sure to use the hinge part that attaches to the printer labeled "FixedHingeFor6mmDoors.stl" as they are thicker to account for the 6mm acrylic.

You will also need a different drill guide, which is available from https://www.thingiverse.com/thing:3591742.

An alternate hinge style designed by Wade Wendorf is available at https://www.thingiverse.com/thing:3680655 and is a 100% printed hinge with no need for a bolt to be used as a pin.

NOTE: Photos are of clear doors on a black background. Acrylic is notoriously hard to photograph well.

These parts are cut on demand due to the options available for them, so shipping will occur within 1-2 days of receiving the order.


We currently have international shipping configured for United Kingdom, Turkey, Germany, France, Sweden, Netherlands, Indonesia, Brazil, Ireland & Norway.

If you are not in one of those countries, please send us an email at email order and we will get shipping configured for your country. Please include your full shipping address so we can get the correct pricing for you.

All imports, duties, taxes or customs charges are the reponsibility of the receipient.