Railcore Aluminum Parts

[E3Dv6 Bracket]  [X Carriages]  [Z Yokes]  [L Brackets]  [Coming Soon]

When you get your e3dv6 Bracket, you will receive the following parts:

  • 1 bracket
  • 1 clamp

This bracket is super stable and very lightweight at only 23 grams. There's enough material there to prevent any flex while giving you great rigidity, designed specially to fit the e3dv6 groovemount and provide all the necessary rigidity and support you come to expect of a printer of this caliber.

If you are outside of the continental United States, please send us an email order and we will invoice you for the Relocation Kit based on shipping costs to that location.





When you get your X Carriages, you will receive the following parts:

  • Front X Carriage
  • Back X Carriage
  • 2 Rail Lock Spacers
  • 2 metal shims for under the rail (0.7mm/0.025")

The X Carriages for the railcore allow for performance and rigidity in the entire belt system for the Railcore printer. No longer will you need to be concerned with the lean that increases over time with the printed versions of the parts.

These are designed by Tony Akens and J. Steve White and have been tested and approved for use in your build.

IMPORTANT NOTE: You need to order 2 - 5mm Shoulder Bolts with a 20mm shoulder from McMaster at this url.

If you are outside of the continental United States, please send us an email order and we will invoice you for the Relocation Kit based on shipping costs to that location.



When you get your Z Yokes, you will receive the following parts:

  • 3 yoke bases - 2 identical/1 mirrored
  • 3 yoke uprights
  • 6 Cap Head Screws (8-32 due to beefier threads)

The Z Yokes provide a super rigid mount to your bed and your linear rails for the Z axis bed leveling.

PLEASE NOTE: The hole spacing for these are 16mm, but a jig is available here for you to drill the 22mm holes yourself.

These are designed by Tony Akens and J. Steve White and have been tested and approved for use in your build.

If you are outside of the continental United States, please send us an email order and we will invoice you for the Relocation Kit based on shipping costs to that location.




When you get your L Brackets, you will receive the following parts:

  • 6 bases
  • 3 uprights - left
  • 3 uprights - right
  • 12 Cap Head Screws (8-32 due to beefier threads)

Super rigid L brackets precision machined for mounting your Z Rails to the printer.

These are designed by Tony Akens and J. Steve White and have been tested and approved for use in your build.

These parts are all made out of 6061

If you are outside of the continental United States, please send us an email order and we will invoice you for the Relocation Kit based on shipping costs to that location.



  • 1/8" clear acrylic electronics covers
  • 1/8" tranparent gray electronics covers
  • Mosquito Hotend Mounts
  • J-Head Hotend Mounts
  • Big Pulleys