Top Enclosure Kit

[More Railcore Upgrade Parts]

The long awaited "Top Enclosure Cover" is finally here!

We will be offering this in both Clear and Smoke Acrylic!

In this kit, you get all parts and hardware you need in order to build your Top Enclosure! We have put together a detailed manual on how to properly assemble your kit which will be included. Total build time is only 1-2 hours.

The 1/4" acrylic of these should be good up to about 100C. The "melting point" of acrylic is 135C - 175C. If you need higher temp materials, please contact us as we are happy to work with you in determining what best will suit your needs and if we can provide it, we will.

Additionally, the back panel happens to have 2 vents in it, that can either have a "vent cover" printed for it, or someone could design a fan mount for it which would allow you to control the temps in the enclosure via a fan or two.

There are a few parts for this that you need to print yourself as we can't stock and print all the colors and types of filament that end users may want. The parts and pieces are avialable via download from Thingiverse.

We look forward to seeing what accessories and modifications you come up with!

PLEASE NOTE: This kit is dependent on the interface kit from J. Steve White and Tony Akens and can be downloaded here.

RailCore Labs and Project R3D recommend upgrading to aluminum Z yokes if you're going to use an enclosure.

The images shown on this page are showing the corner mounts only, which is the minimum required to mount the top enclosure, the 302mm interface part will cover 2-3 sides, and the smaller sections will allow you proper placement for the various items you may have mounted on your printer such as the cable system, filament holders, etc...

On mine, I choose to print 302mm parts all the way around (using the Magnum Pulleys and Magnum Pulley Mounts, this moves all pulleys and belts inside the build area), and modify the STEP file from the Fusion archive to include cutouts for my filament spool holder and filament feed line on the right side of the printer. You could also just print the various smaller interface parts. The choice is yours!

We order enough parts to kit 10 enclosures at a time, if we do not have parts in stock, we will email you with an estimate of when your order will be ready for shipping, typically within a week.

We currently have international shipping configured for United Kingdom, Turkey, Germany, France, Sweden, Netherlands, Indonesia, Brazil, Ireland, Norway, Belgium, India, Austria.

If you place an order from a country not in the list above, you will receive an invoice for the appropriate shipping amount.

If you are not in one of those countries, please send us an email at email order and we will get shipping configured for your country. Please include your full shipping address so we can get the correct pricing for you.

All imports, duties, taxes or customs charges are the reponsibility of the receipient.

Full Top Enclosure Kit

Acrylic Only - Top Enclosure Parts