Resin Fan Shrouds


Mandible Fan Duct



Aluminum
Duct Mounts


[More Railcore Upgrade Parts]



We are pleased to be able to announce that we are licensed to print and sell the "James Tongue Mandible" fan shroud for the Railcore ZL/ZLT printers! A portion of the proceeds of these sales go back to the designer, James Tongue himself!

Our shrouds are printed out of Fun To Do Industrial High Temp Resin, and are good up to 225C!

With your aluminum Y carriage kit, you get the Mandible, 2 brackets to support the different style Y Carriages available, and a spacer all out of the high temp resin!

We also have an option for the Hemera, in which you get the Hemera specific shroud only as the hemera fan bolts to the bottom of the Hemera mount with no need for a special bracket.

Please Note: Resin, while strong, has absolutely ZERO give. If your nuts for the mounting brackets do not fit easily, DO NOT FORCE THEM. The resin WILL crack. Instead, use a knife or dremel to widen the hole till your nut seats easily into the cavity.

There is a small nub on the back of the fan that is recommended for use on the railcore. Please clip this flush or sand down the little nub. If you try to force it into the resin duct, which has no give, you run the risk of cracking the duct.

Future resin ducts will have the fan mounting hole tapped. While a bolt can be screwed into this hole without tapping, if you find it hard to install, please take the time and thread the hole with a m3x0.5 tap.

Fan Shroud

We currently have international shipping configured for United Kingdom, Turkey, Germany, France, Sweden, Netherlands, Indonesia, Brazil, Ireland, Norway, Belgium, India, Austria, Canada, Australia, Denmark, Russia, Italy, Switzerland, New Zealand, Malaysia.

If you place an order from a country not in the list above, you will receive an invoice for the appropriate shipping amount.

If you are not in one of those countries, please send us an email at email order and we will get shipping configured for your country. Please include your full shipping address so we can get the correct pricing for you.

All imports, duties, taxes or customs charges are the reponsibility of the receipient.



There have been many requests for metal mounts for the James Tongue Mandible Shroud, so we have come up with this. No longer is there a need for nuts, as the necessary holes are tapped with m3 threads!

There are 2 versions of this available, one for the
MRW - S/D Carriages, and another that is compatible with the 713 Y carriage.

PLEASE NOTE: These adapters are ONLY for the ALUMINUM fan shrouds, if you have a fan shroud for the printed carriage, aka the kit fan shroud, these adapters will not work.

We currently have international shipping configured for United Kingdom, Turkey, Germany, France, Sweden, Netherlands, Indonesia, Brazil, Ireland, Norway, Belgium, India, Austria, Canada, Australia, Denmark, Russia, Italy, Switzerland, New Zealand, Malaysia.

If you place an order from a country not in the list above, you will receive an invoice for the appropriate shipping amount.

If you are not in one of those countries, please send us an email at email order and we will get shipping configured for your country. Please include your full shipping address so we can get the correct pricing for you.

All imports, duties, taxes or customs charges are the reponsibility of the receipient.

Mount Type