E3D Magbed Front
  • E3D Magbed Back
  • E3D Magbed Front

Magbed for E3D Toolchanger


Mandala Rose Works magbed for the E3D Toolchanger is designed to mount onto the existing mounting holes for the printer.  

This is a top magnet designed bed. The 9 high temperature (150C) neodymium magnets N48SH are recessed into custom milled pockets on the top side of the bed, to keep them as close to the flex sheet as possible.

With the Subtle Design or Buildtak Flex sheets, we see enough holding power laterally that we can actually slide a printer. Please note that flex sheets vary in magnetic strength, depending on the material and thickness used by the flex sheet manufacturer.

All of our beds are flat to at most 0.2mm, and generally are much better than that.

Bed dimensions are 316mm x 216mm x 6mm thick.

Special thanks to Joe Spanier for assistance in designing and testing the bed.


  Delivery policy

We ship within one business day. Message us if your country is not available, and we will add it.

You might also like